Fishkatcher Industries |Rod holders |Outriggers |electronics boxes |Led lighting and Rocket launchers

Fishkatcher Industries

Fishkatcher.com

Home|Tradeshows||Gallery|About||Links

HIGH QUALITY SPORTFISHING & MARINE SUPPLIES!!

The Low Prices & Great Products !

WE WILL BEAT ANY LEGITIMATE PRICE FROM OUR COMPETITION BY 10% call or email for the price guarantee

Fishkatcher Industries LTD

Promote Your Page Too

Click on image

A Series
Heavy Duty Cast Rod Holder

Fishkatcher Industries
your CE Smth Supplier
Heavy Duty 316 Grade Cast Stainless Steel Rod Holder with white insert as shown. High Quality product with Mirror finish at a very reasonable price. Available in 0,15 & 30 Degree angles 30 degrees are standard in most applications

Powerboat Reports Sept 2005 Issue Rated C.E Smith Best Rod Holder over the competition for quality, looks, warrenty and cost

Backing Plates for 70 Series $14.99 ea

CE-Smith A Series
Heavy Duty Cast Rod Holder
Retail Price: $~~68.99~~

Fishkatcher price $49.99 ea + S&H

70 C series Heavy Duty Rod Holder

CE Smth Heavy Duty C Series Flush Mount Rod Holders
--------------------------------------------------------------------------------

Made of 100% 316 stainless steel, these flush mount in-gunnel rod holders feature an extra large, low profile cap which enhances the appearence of any boat.
They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of down riggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place.
Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8". They have a choice of 0°, 15° or 30° cap angle in highly polished silver finish, with a heavy duty 100% welded tube-to-cap joint which will not break out.

The 70C series feature a beautifully rounded cast bottom end with a 1/2" threaded drain. Use them when the bottom of the rod holder must have a decorative appeatance, or add a drain tube and use when there is dry storage space under the rod holder.
Highly Polished silver finish, with a heavy-duty 100% welded tube-to-cap joint which will not break out.
They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of down riggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place.

Backing Plates for 70 Series $14.99 ea

CE-Smith 70 C Series Rod Holders
Retail Price: $~~89.99~~

Fishkatcher price $59.99 ea + S&H

80 C series Heavy Duty Rod Holder

CE Smth 80C series feature a beautifully rounded 10-1/2" x1-7/8" Id cast bottom end with a 1/2" threaded drain. Use them when the bottom of the rod holder must have a decorative appeatance, or add a drain tube and use when there is dry storage space under the rod holder.
Highly Polished silver finish, with a heavy-duty 100% welded tube-to-cap joint which will not break out.
They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of down riggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place.

Backing Plates for 80 Series $14.99 ea

80 Series Heavy Duty Rod Holder 10-1/2" x 1-7/8" I.D.

Retail Price: $~~99.99~~

Fishkatcher Price $69.99+ S&H

53673A CE Smith 70 Series Rod Holder Backing Plates

53683A CE Smith 80 Series Rod Holder Backing Plates

Pkg. Backing plate for 70 series

Pkg. Backing plate for 80 series

Backing Plates your choice $15.99 ea

55100A CE Smith Economy Stainless Steel Rod Holder

304 Stainless Steel Rod Holder

This Mirror Polished 30 degree rod holder is great for fresh water or light saltwater rods. UV resistant black PVC cap and liner. 9" deep tube is 1-9/16" inside diameter. 1/4" 304 stainless gimbal pin. Mounts with 3/16" screws(not included)

Pkg Flush Mt 30° Rod Holder 2/Black Cap & Gasket

$19.99 ea + S&H

Corrosion Free Nylon rod Holder

These 30 degree light duty fishing rod holders are an economical way to add more rod storage. Molded in one piece from UV resistant Nylon, these rod holders are tough and corrosion free. 10" tube. Cap is 4" long x 3-1/2" wide. Installs into a 2-1/16" hole. Mount with 3/16" screws(not included)

Available in white or black.

Pkg Tournament Rod Rack, White
Pkg Tournament Rod Rack, Black

$11.99 ea + S&H

Click on image

List Price $~~167.95~~

Your Low Price $99.99

Fishkatcher Industries your Tigress® Supplier

Pivoting Rod Holders (Swivel Rod Holders)
Crafted from Stainless Steel.

316 SST Cast Head with 304 SST Cast Tube

#88520 – 30° Large Pivoting Rod Holder – Head 3.85" x
4.88", 10-1/2" x 2-1/4", ID 1.673

#88522 – 0° Large Pivoting Rod Holder – Head 3.85" x 4.88",10-1/2" x 2-1/4", ID 1.673

#88524 – 15° Large Pivoting Rod Holder – Head 3.85" x
4.88", 10-1/2" x 2-1/4", ID 1.673

Large Pivoting Rod Holder
Retail Price: $~~164.99~~

Fishkatcher Price $99.99+ S&H

Click on image

Lowest prices on Trigress Rod holders

List $~~179.99~~

Your Low Price $134.99

Fishkatcher Industries your Tigress® Supplier

Tigress® Pivoting Rod Holders (Swivel Rod Holders)
Crafted from Stainless Steel.

316 SST Cast 4 Hole Head with 304 SST Cast Tube

#88520XL – 30° Extra long and 4 hole version of our pivoting rod holder 12-1/2" x 2-1/4"

#88522XL – 0° Extra long and 4 hole version of our pivoting rod holder 12-1/2" x 2-1/4"

#88524XL – 15° Extra long and 4 hole version of our pivoting rod holder

12-1/2" x 2-1/4"

4 Hole Flange XL Swivel Rod Holder

Large Pivoting Rod Holder
Retail Price: $~~189.99~~

$149.99 + S&H

Click on image

List Price $~~65.00~~

Your Low Price $48.00

Fishkatcher Industries your Tigress® Supplier

Tigress® Premium Flush Mount Rod Holders
316 SST Cast Head with 304 SST Cast Tube

#88525 – Medium 30° Flush Mount Rod Holder –
Head 3.28" x 4.06", 9" x 2", ID 1.673

#88527 – Medium 0° Flush Mount Rod Holder –
Head 3.28" x 4.06", 9" x 2", ID 1.673

#88529 – Medium 15° Flush Mount Rod Holder –
Head 3.28" x 4.06", 9" x 2", ID 1.673

TG-88525 – Medium 30° Flush Mount Rod Holder

Retail Price: $~~89.99~~

Fishkatcher Price $48.99 + S&H

Click on image

List price $~~85.00~~

Your Low Price $63.99

Fishkatcher Industries your Tigress® Supplier

Tigress® Premium Flush Mount Rod Holders

316 SST Cast Head with 304 SST Cast Tube

#88530 – Large 30° Flush Mount Rod Holder –
Head 3.85" x 4.88", 12" x 2-1/2", ID 1.673

#88532 – Large 0° Flush Mount Rod Holder –
Head 3.85" x 4.88", 12" x 2-1/2", ID 1.673

#88534 – Large 15° Flush Mount Rod Holder –
Head 3.85" x 4.88", 12" x 2-1/2", ID 1.673

Tigress® Premium Flush Mount Rod Holder
Retail Price: $~~119.99~~

$68.99 +S&H

Tigress

TigressHeavy Duty Rod Holder Backing Plates for 30, 15 and 0 degree for heavy duty 3 and 4-hole Swivel Rod holders.

Tigress Heavy Duty Backing Plates

Regular Price starts @ $24.95

Starting at $18.99 to $19.99

#77900-2 Backing Plate

Drain plug 77910 for

Tigress® Round Head Rod Holders

Heavy Duty Closed End Base with Drain Hole to accept 1/4” IPS Pipe to Hose Fitting.
#77900 30° Round Head Rod Holder 9” x 2” ID 1 5/8”
#77901 15° Round Head Rod Holder 9” x 2” ID 1 5/8”
#77902 0° Round Head Rod Holder 9” x 2” ID 1 5/8”
#77906 30° Round Head Rod Holder 10 1/2” x 2 1/2” ID 1 7/8”
#77907 15° Round Head Rod Holder 10 1/2” x 2 1/2” ID 1 7/8”
#77908 0° Round Head Rod Holder 10 1/2” x 2 1/2” ID 1 7/8”

Tigress® Round Head Blind
Mount Rod Holders
Retail Price: ~~109.95-~~$~~134.99~~

Starting $74.99 to 99.00 ea + S&H

Tigress

#77900-2 Backing Plate

Drain plug 1/4” IPS Pipe to Hose Fitting
77910

TG-77900-2 $ $14.99 ea +S&H

TG-77910 $18.99 ea S&H

Drain plug 77910 for

Tigress® Round Head Blind
Mount Rod Holders
Eliminate fastening from the top of
flange and enhance the look of
your gunnel. Closed bottom allows
for use of drain plug 77910 for
directing water to the bilge. Crafted
from 316 Stainless Steel
#77900-1 - 30 Round Head Rod
Holder 9” x 2” ID of 1 5/8”
#77901-1 - 15 Round Head Rod
Holder 9” x 2” ID of 1 5/8”
#77902-1 - 0 Round Head Rod
Holder 9” x 2” ID of 1 /5/8

Tigress® Round Head Blind
Mount Rod Holders
Retail Price: $~~109.99~~

$79.99 ea + S&H

Tigress

SeaTiger “Economy” Stainless Steel Rod Holders
Crafted as a more economical
alternative to our Premium Rod
Holders. For the budget-minded
fisherman, our SeaTiger Flush
Mount Rod Holders are available
with either a stamped mounting
flange or cast stainless steel
flange. For durability and looks.

#77170– Stamped Stainless
Steel Oval Rod Holder (Flip Top) 30°

SeaTiger “Economy” Stainless Steel Rod Holders

#77170– Stamped Stainless
Steel Oval Rod Holder (Flip Top) 30°Retail Price: $~~109.99~~

$22.99 ea + S&H

Tigress

SeaTiger “Economy” Stainless Steel Rod Holders
Crafted as a more economical
alternative to our Premium Rod
Holders. For the budget-minded
fisherman, our SeaTiger Flush
Mount Rod Holders are available
with either a stamped mounting
flange or cast stainless steel
flange. For durability and looks.
#77171 – Stamped Stainless
Steel Rod Holder (Flip Top) 30°

SeaTiger “Economy” Stainless Steel Rod Holders

#77171 – Stamped Stainless
Steel Rod Holder (Flip Top) 30°Retail Price: $~~109.99~~

$22.99 ea + S&H

Tigress

SeaTiger “Economy” Stainless Steel Rod Holders
Crafted as a more economical
alternative to our Premium Rod
Holders. For the budget-minded
fisherman, our SeaTiger Flush
Mount Rod Holders are available
with either a stamped mounting
flange or cast stainless steel
flange. For durability and looks.
#77172 – Stainless Steel Oval
Cast Rod Holder (Flip Top) 30°

SeaTiger “Economy” Stainless Steel Rod Holders

#77172 – Stainless Steel Oval
Cast Rod Holder (Flip Top) 30°Retail Price: $~~109.99~~

$37.99 ea + S&H

Tigress

.#77174 – Stainless Steel
Cast Rod Holder (Open) 30°

SeaTiger “Economy” Stainless Steel Rod Holders

#77174 – Stainless Steel
Cast Rod Holder (Open) 30°Retail Price: $~~109.99~~

$34.99 ea + S&H

Click on image

Fishkatcher Industries your Reelax Supplier

Reelax Rod holder Standard Hardware on Riviera Yachts from Australia. Available in 90degree or 30 Degree.

316 Stainless steel construction. Mirro Polish finish. Gimbal pin is replaceable

Cap and gasket included.

#R-500
REELAX SST Heavy duty 30 degree rod holder $135.00. ea. + S&H

#R-501
REELAX SST Heavy duty 90 degree rod holder
$180.00. ea. +S&H

aco LED Marine Lighting, Taco Cutting Boards, Taco Bait tables, Taco drink holders, Taco accessories ready productsCe Smith Rod Holders, White Cap Bolt on Rod Holders, CE-Smith 15 degree rod holders, Ce Smith 30 degree rod holders, Ce Smith 0 degree rod holders, Tigress four hole flange rod holders Tigress Rod holder inserts Reelax Rod holder caps, Tigress Rod Holders, CE Smith Rod Holders, Tigress Swivel Rod Holders, Ce Smith Gunnel Mount Rod Holders, Taco LED Marine Lighting, Taco Cutting Boards, Taco Bait tables, Taco drink holders, Taco accessories ready products Ce Smith Clamp on Rod Holders, Tigress Kite Rod Holders, Tigress Cluster Rod Holders, White Cap Bolt on Rod Holders, Tigress 15 degree rod holders, Tigress 30 degree rod holders, Tigress 0 degree rod holders, Tigress four hole flange rod holders Rod holder Tigress inserts Rod holder caps, Tigress Rod Holders, CE Smith Rod Holders, CE-smith Swivel Rod Holders, Ce Smith Gunnel Mount Rod Holders, Ce Smith Clamp on Rod Holders, Tigress Kite Rod Holders, Tigress Cluster Rod Holders, Whitecap industries Bolt on Rod Holders, 15 degree rod holders, 30 degree rod holders, 0 degree rod holders, Tigress four hole flange rod holders Tigress Rod holder inserts Reelax Rod holder caps, Tigress Rod Holders, CE Smith Rod Holders, CE Smith Swivel Rod Holders, Tigress Gunnel Mount Rod Holders,Taco LED Marine Lighting, Taco Cutting Boards, Taco Bait tables, Taco drink holders, Taco accessories ready products CE Smith Clamp on Rod Holders, Tigress Kite Rod Holders, Tigress Cluster Rod Holders, Whitecap industries Bolt on Rod Holders, Ce SMith 15 degree rod holders, CE Smith 30 degree rod holders, Ce Smith 0 degree rod holders, TIGRESS four hole flange rod holders Rod holder Tigress inserts Rod holder caps, Tigress Rod Holders, CE Smith Rod Holders, Swivel Rod Holders, Ce SMith Gunnel Mount Rod Holders, Tigress Clamp on Rod Holders, Tigress Kite Rod Holders, Tigress Cluster Rod Holders, Whitecap industries Bolt on Rod Holders, Ce Smith 15 degree rod holders, Ce Smith 30 degree rod holders, CE Smith 0 degree rod holders,Taco LED Marine Lighting, Taco Cutting Boards, Taco Bait tables, Taco drink holders, Taco accessories ready products Tigress four hole flange rod holders Rod holder Solo inserts Reelax Rod holder caps, Tigress Rod Holders, Taco rod riggers, CE Smith outrodders, Tigress rod riggers Taco outrodders CE Smith rod riggers outrodders

Websites by VR & JG

Fishkatcher Industries
140 South 6th Street- Lindenhurst, N.Y. 11757
Phone/ Local (631) 806-6009 -- fax (631) 957-0905
SALES BY APPOINTMENT PLEASE
By e-mail: sales@fishkatcher.com